Mounting the Fixture
The standard mount
(MTP-KG41)
comes with a
3/8” Lollipop that clamps into a grip head. The ball
and socket mount allows the fixture to be oriented in
a broad range of angles.
Align the center pin of the mounting plate to the
center hole on the mating plate.
Rotate plate clockwise until the four shoulder rivets
drop into the receptacle. A locking pin will snap into
place when the plate is properly seated.
The
yellow wire loops
provide attachment points for
a safety chain.
To remove the plate
, pull up on the locking pin and
reverse the mounting procedure.
Lollipops are interchangeable.
MTP-L
Kino 41 Lollipop w/ 3/8” Pin (10mm)
MTP-LBC
Kino 41 Lollipop w/ Baby Rcvr Curve
(16mm)
MTP-LBS
Kino 41 Lollipop w/ Baby Rcvr Short
(16mm)
Turn the knob to loosen or tighten the mount.
6
