Page 5 of 5
17)
Otherwise fit the screws to the control plate and the pickguard taking care not to cross thread the screws in
the wood.
18)
Proceed to restring and adjust the pickup heights.….. Please visit www.kinman.com >Tone Workshop
>Tone for detailed info on how to get the best out of your pickups and guitar. There is a wealth of
information in this section of my Website that will fascinate and delight you for many hours.
End
Press the tips of the switch frame
into the wood if they don’t align
within the cavity.
Diagram 2:
Position of the small dowel on which
to lightly hammer as instructed in 15)
Shield
Photo 4
Arrange the cables to
lie in the gap between
the switch and the
Volume pot while
replacing the control
plate.
This switch terminal
must NOT be bent over
.