3.4 Installation diagram.
Electric film reeler
Electric film reeler
6
3.4.1 Please operate this product according to the “correct
installation diagram”.
3.4.2 Correct installation could guarantee the performance of
the products.
3.4.3 After the installation, the electric film reeler should be
above the limit switch at any position of the rolling.
3.4.4 After the installation, the cable should be connect into the
control box, then turn on the power, adjust the limit switch
the proper position, and then fasten the lock bolts.
3.4.5 If there is power failure during the operation of the products,
and you would like to lower down the rolling pipe urgently,
you could hold the pipe first and loosen the connection
between the pipe and the motor, then lower the pipe slowly.
3.5 Installation dimension
5
