background image

1.10 The user should keep the site clean and swipe the leaves
        or snow on the plastics to avoid overload damage.
1.11  After the adjust is finished, the user should fasten the bolts
        or there might be damage or accidents.
1.12 Don’t use the product over the maximum currency.
1.13 In the transportation or in installation please prevent the 
        products from falling; tossing the cable is prohibited.
1.14 Please note the mounting position of power cord, to prevent
        it winding or broken
1.15 Please do not switch it frequently,so as not to damage the 
       motor.
1.16 We are not responsible for the damage due to ignorance 
        of our instruction manual.

2

FEATURES & PARAMETERS

2.1 Features 
      This product is compact and performances well. It is easy to
      install and operate. The range limit is adjustable. It has reverse
      self-locking function.
2.2 Basic components illustration

Motor

Gear box

Limit device

Side opening

bracker

Manual

operation part

Top opening

bracker

Coupling

Suit(subject to

the diameter of
the pipe used)

Plugs

2

4.2.4 When the electric film reeler is rolling up the plastics, the 
         pipe arrives at the required position, at this time rotate the
         knob which controls the rolling status and make the gear 
          pin touch the micro switch( with click sound), hold on and 
          fasten the lock bolt by a cross head screw-driver. 
4.2.5 When the electric film reeleris rolling down the plastics, the 
          pipe arrives at the required position, at this time rotate the 
         knob which controls the rolling status and make the gear 
         pin touch the micro switch( with click sound) , hold on and 
          fasten the lock  bolt by a cross head screw-driver. 
4.2.6 The above steps would set up the motor’s limit range. Turn
         on the power and check if the range setup is correct. If it is
         not correct, please review the manual carefully and do the 
         setup again. 

5. MAINTENANCE

5.1 Check the bolts on each connection regularly. Replace the 
      bolts which is deformed or snapped. 
5.2 No need to refill the gear oil during the life duration of this 
      product.  
 5.3 This product could be used for greenhouse rolling ventilation
      and curtaining system. For other usage, please consult our 
      company first. 

6. COMMON PROBLEMS AND SOLUTIONS

  

9

Summary of Contents for GMD120-S









Reviews: