your sport data will automatically synchronize (or manually refresh) from watch to the APP,
including steps count, distance, calories and other parameters.
3.3 Sleep monitor
The default sleep monitor time for the watch is from 20:00 pm to 10:00am. If you wear a
watch to sleep, you can check last night
’
s sleep time on the watch after getting up the next
morning. When watch is successfully paired with APP, the sleep data will be automatically
synchronized (or manually synchronized) to the APP. The watch will automatically recognize
and judge what the sleep state it comes to be . If you just get up shortly from bed, the sleep
data displayed on the watch is different from the actual data because the watch is still
detecting sleep. It is only when the watch completes detection that will show results of the
whole night, and is consistent with the actual data. It will be acceptable to have some errors
with the actual data due to different sleep states.
3.4 Heart rate monitor
When heart rate data is empty, it displays
“
000Bpm
”
. Go to the heart rate icon, long press the
touch key for more than 2s to start testing. The data displays directly after testing. It is
continuously measured for 30 seconds and it just keeps the last data. if it exits from the current
page during measuring, the testing value is not recorded.
3.5 Training
3.5.1 Exercise includes: Walking,Running, Cycling, Skipping, Badminton, Basketball, Football.
3.5.2 Switch the corresponding training icon: Long press to enter the corresponding exercise
mode, data such as steps, distance, calories, heart rate, exercise duration will be visible.
Long press on the current sport page to pause, and exit from the application.
3.5.3 Activity data can only be uploaded to APP for view. While the data after exercise can not
be viewed on the watch.
Note: Sport data save rules: 1.Exercise time more than 2 min or; 2. with testing heart rate
data;
It needs to meet any one of the two conditions that can save data, if not, it will not keep any
exercise data.
3.6 Blood Pressure
Go to the blood pressure icon and long press the touch key to measurement. You can stop it
after the measured value is obtained.
3.7 Blood Oxygen
Go to the blood oxygen icon and long press the touch key to measurement. You can stop it
after the measured value is obtained.
