your album.
Apple Phone: Click the
“
Shutter
”
from the iphone and your phone needs to open
the camera manually(due to the IOS system) then click to take pictures on watch.
3.5 OTHERS
3.5.1 Find Device: Click
”
Find Device
”
, it will vibrates to remind on watch.
3.5.2 Time Formats: Click to set the 12-hour Time or the 24-hour Time. It's set after click
DOWN, The watch time is synchronized with your setting time format.
3.5.3
“
Do not disturb
”
:
“
Closed
”
is the default mode. Click to enter the setting page, you
can set the
“
do not disturb
”
mode according to your personal needs. Information
will not be accepted again after setting.
3.5.4
“
Reminders to Move
”
: Default mode is
“
off
”
. Sedentary reminder only takes effect
from 10:00- 22:00.
3.5.5 Quick View: Default mode
“
ON
”
. An effective duration can be set. you can set
valid period according to individual required duration.
3.5.6 Weather: switch to open and close weather function, and you can manually set up
the city or automatic positioning. The positioning needs to give authority,
otherwise it is not available to use. Weather information update once every 2
hours, if it is in closed state, it takes 2 hours waiting before disappearing on watch.
3.6 UPGRADE
When a new version of the server is detected, a new version of the watch firmware
can be upgraded
3.7 REMOVE
The Pairing watch and phone app can be removed.
Note: For Apple phone IOS, go to
“
Settings
”
-
“
Bluetooth
”
, to ignore current
Bluetooth pairing, in order to completely unbinding.
3. Main functions
3.1 Basics
3.1.1 Power ON: When watch is power off, long press the side button for 5 seconds to power
on. In the standby state, short press the side button to wake up it.
3.1.2 Power OFF: When watch is power on, long press the side button for 5 seconds to
power off directly.
3.1.3 Check Device information: Long press the touch key to enter the Message interface.
You can see the Bluetooth name, device type, device address, etc.
3.2 Steps
You can view pedometer data on watch and APP. When watch is successfully paired with APP,
