5.1.1 Press the display touch area for over 3 seconds
5.1.2 Make sure there is enough battery. Battery power may be too low, please charge it.
5.1.3 If leave the watch too long and the normal charger does not respond, please try
charging with an output power of 5V/1A.
5.2 Shut down automatically
5.2 Battery power may be too low, please charge it.
5.3 Short battery life
5.3.1 It may occur when the battery hasn
’
t been fully charged, please ensure sufficient time
for the charging ( at least 2 hours is required)
5.3.2 Charger or data cable may not work properly, please change a new one.
5.3.3 Please check the port of the data cable and try again to ensure a proper connection.
5.4 BT disconnect or unable to connect
5.4.1 Please restart it
5.4.2 Please turn off BT of mobile phone and open it to reconnect.
5.5 Inaccurate sleep data
Sleep monitor is designed to imitate the natural pattern of falling asleep and waking up,
please wear the watch normally, otherwise deviation may occur if going to bed late or only
wear while sleeping. There may not sleeping data generate if go to bed at day time as the
defaulted sleeping time is preset to between 9:00 pm to 9:00 am.
