8
Preparation:
Check that all parts are complete as per the list and drawing. Have the tools
ready:
Box wrench 8 mm
or
Pliers
and a suitable
Philips screwdriver
.
Mounting steps:
1.
First of all , assembly the handle parts with the screw (D) as the
photo below shown.
2.
Attach handle (1) to the fire bowl (9) using screws , washers and
nuts( A).
3.
Align the Charcoal grate support (7) hole and the leg base tube (10)
hole to the fire bowl (9) holes,attach them using screws , washers
and nuts (A).Do not tighten.Follow the same step for other two
Charcoal grate supports.
4.
Insert the long leg(16) into the leg base tube (10). FIRE BOWL
HANDLE SHOULD BE LOCATED ON THE LONG LEG.
5.
Insert the bottom shelf(17) into the long leg(16) ends. The bent tip
goes into the hole of the long leg first,then align and insert the
other end into the wheel legs(15). Attach the wheels(18) with the
big washer and nut (C). Then attach the weel cover(19) to the
wheel(18).Then tighten each screw to secure each leg to bottom
unit.
6.
Let the long end of the fire bowl air vent( 11) go through the hole
