HINDI
DT
jhMj gkMZos;j LFkkFir djus Laca/kh FunsZ’k
DT
jhMj ,d
USB
¶ys’k Mªkbo gs ftl ij
SD/MMC
foLrkj LykWV yxk gqvk gsa tc bl
USB
iksVZ esa Mkyk tkrk gs] rks nks
Mªkbo v{kj ¼vFkkZr~
G:\
vksj
H:\
½ fn[kkbZ nsaxsa ,d
DT
jhMj dh vkarfjd esejh ds fy, vksj nwljk foLrkj LykWV ds fy,a vf/kd
tkudkjh izkir djsa%
www.kingston.com/support/install/dt
SD/MMC
ehfM;k Mkyuk vksj fudkyuk%
1. esejh dkMZ doj
(#1)
[kksysaa
2. esejh dkMZ LykWV
(#1)
esa ehfM;kMkysa( laidZ fcunq uhps dh vksj jgsaa ehfM;k dks
fudkyus ds fy, btsdV Vsc
(#2)
dk iz;ksx djsaa
3. lqj{kk ds fy, dkMZ doj cun dj nsaa
LVªsi vunj Mkyuk ¼osdfYid½ %
1.
USB
dsi ds lkbM ij cus nsn ls LVªsi (#4)vunj Mkysaa
2.
DT
jhMj ds lkbM ij cus nsn ls LVªsi vunj Mkysasa
3. LVªsi ls ,d ywi cuk,a vksj
USB
usB dsi dks nsn esa Mkysaa
4.
USB
dsi dks [khapdj LVªsi dks dl nsaa
#1
#2
#3
Inserting the media into the DT Reader:
1. Open the
memory card cover (# 1)
.
2. Insert the MMC/SD media into the
memory card slot (# 3);
contacts facing down.
3. Close the memory card cover for protection.
Removing the media from the DT Reader:
1. Open the memory card cover.
2. Use the
eject tab (# 2)
to remove the media from the memory card slot.
The DT Reader is a standard USB flash drive with onboard SD/MMC expansion. When
inserted into the computer’s USB port, the DT Reader will be assigned two drive letters
(i.e. G:\ and H:\). One drive letter will be assigned to the DT Reader’s internal memory,
and another drive letter will be assigned to the onboard SD/MMC expansion slot.
# 4
Inserting the strap (Optional):
1. Feed the strap (# 4) through the hole on the side of the USB cap.
2. Feed the strap through the hole on the side of the DT Reader.
3. Create a loop with the strap and insert the USB cap into the opening.
4. Tighten the strap by pulling on the USB cap.
DT Reader Hardware Installation Instructions
v1.5
