#1
#2
#3
Inserting the media into the DT Reader:
1. Open the
memory card cover (# 1)
.
2. Insert the MMC/SD media into the
memory card slot (# 3);
contacts facing down.
3. Close the memory card cover for protection.
Removing the media from the DT Reader:
1. Open the memory card cover.
2. Use the
eject tab (# 2)
to remove the media from the memory card slot.
The DT Reader is a standard USB flash drive with onboard SD/MMC expansion. When
inserted into the computer’s USB port, the DT Reader will be assigned two drive letters
(i.e. G:\ and H:\). One drive letter will be assigned to the DT Reader’s internal memory,
and another drive letter will be assigned to the onboard SD/MMC expansion slot.
# 4
Inserting the strap (Optional):
1. Feed the strap (# 4) through the hole on the side of the USB cap.
2. Feed the strap through the hole on the side of the DT Reader.
3. Create a loop with the strap and insert the USB cap into the opening.
4. Tighten the strap by pulling on the USB cap.
DT Reader Hardware Installation Instructions
v1.5
