33
t3FNPWFXBMMQMBUFGSPNVOJUCZVOTDSFXJOHUIFUXPTDSFXT
on the bottom edge of the unit.
t'SPNUIFUPQMFGUIBOEDPSOFSPGUIFXBMMQMBUFUIFSFNVTU
be clearances of at least 140 mm to the right, 15mm to the
left, 30mm above and 100mm below in order to mount
the plug-on module.
t5IFXBMMQMBUFNVTUCFTFDVSFMZNPVOUFEFJUIFSEJSFDUMZUP
the wall using suitable wood screws or to a fl ush mounted
1-gang electrical accessory box using M3.5 screws.
t$BCMFBDDFTTDBOFJUIFSCFGSPNCFIJOEGPSDPODFBMFE
cabling, or from below for surface cabling. If surface cable
is used, cut out cable access slot on plug-on module prior
to mounting the module.
t'PSXJSJOHDPOOFDUJPOTSFGFSUPEJBHSBNCFMPX
TS715-Si models are double insulated and do not require
an earth connection, however a parking terminal is
provided on the wallplate. This is clearly marked with an
Earth symbol.
t1SJPSUPNPVOUJOHUIFQMVHPONPEVMF%*-TXJUDIFTPO
the rear of the plug-on module must be set. See diagram
below for available options.
t.PVOUQMVHPONPEVMFUPXBMMQMBUFCZMPDBUJOHUBCTPO
top of wallplate in apertures on rear of module, hinge
down and press fi rmly to wallplate before tightening
securing screws on bottom of wallplate. Before mounting
the unit, ensure the 4 DIL switches on the rear have been
moved to the required settings.
Installation
Please Note:
Always switch off mains fi rst and never fi t programmer to a live wallplate.
Wiring - See page 19 for further details
DIL Switch Settings
Before mounting the unit, ensure the 4 DIL switches on the
rear have been moved to the required settings.
Not Used
Not Used
5/2 Day
7 Day
Sw.1
Sw.2
Sw.3
Sw.4
Not Used
Not Used
7 Day or 24 Hour
24 Hour
INSTALLER SETTING
24 Hour
5+2 Day
7 Day
Tick the INSTALLER SETTING box on the inside fl ap label
to notify user in which mode their unit is set (24hr, 5/2
day or 7 day).
7 day hot water programmer
