1. Mode Introduction
2. Standby Mode
3. Introduction to the control of the fixed speed mode (beginner mode)
09
10
In this mode, the treadmill stops functioning to prevent
the non-users from triggering the Treadmill.
Control the speed by using the remote control. We suggest begin-
ner to walk under this mode firstly, only start walking under auto-
matic mode after proficiently using the Treadmill.
In this mode, if the user leaves the Treadmill for more than 15 sec-
onds, the Treadmill will stop automatically!
When the machine stops , user can lock the machine by pressing &
holding the mode button for more than 2 seconds.
To restart the treadmill, press and hold Start or Mode button for
more than 2 seconds for unlocking.
Mode
Single Click: Return to the last mode.
Standby Mode
When the light is on, electric motor and
sensor stop functioning.
Manual Mode
When the light is on, control the speed
by the remote control or APP.
Automatic Mode
Light of the automatic mode is on;
Speed is controlled automatically by
intelligent algorithm. It follows the
speed of walking.
Standby Mode
Manual Control
Mode key
Single Press: Switch to the automatic mode;
Press And Hold for more than 2 seconds: unlock the
Treadmill.
Acceleration
Single Click: accelerate by 0.5km/h
;
Press and Hold: continuously accelerate.
Start/Stop
Single Click: Start or stop the Treadmill;
Press and Hold: For more than 2
seconds: unlock the treadmill.
Deceleration
Single Click: decelerate by 0.5km/h;
Press And Hold: continuously decelerate.
4. Learn to Use the Treadmill
• Lift up the handrail, maximum speed is 12km/h, which is suitable
for running. User can only use the machine after inserting safety
key in the safety lock.
• Pull down the handrail, maximum speed is 6km/h, which is suit-
able for walking. User can use the treadmill without inserting
safety key in the safety lock.
• If user stop using the treadmill more than 10 minutes, it will be in
Standby Mode automatically.
