background image

17

18

7. Maintenance

1. Cleaning

• Turn off the machine and unplug the power cord.
• Add several drops of detergent on cotton rag or towel. Don't pour the deter-

gent on the belt directly, and don't use acid or corrosive cleaners.

• Wipe off dust and stains on the frame, front panel and belt. Do not wipe back-

side of the belt.

• After using for a period, dust and stains may appear on the back part, that is 

normalsituation, and just clean them up.

• If belt deviates from the right: rotate the left adjustment screw clockwise for 

1/4 circle. 

• If belt deviates from the left, rotate the right adjustment screw clockwise for 

1/4 circle. 

• The Treadmill belt slipping: simultaneously rotate the left and right adjustment 

screws  together clockwise for half circle. 

• Keep the machine running for 1-2 minutes and check whether it needs to 

readjust.

• Shut down and unplug the Treadmill power cord.
• Raise the Treadmill band edge and apply the silicone oil on the inner surface.
• Reconnect the Treadmill power. 
• Let the Treadmill belt run for 10-20 seconds at the speed of 4km/h for use.
• One lubricating operation needs 5-10 ml silicone oil. Excessive applying will 

cause the slipping phenomenon and affect the normal use. 

• Add the silicone oil once for every three months. 

2. The Treadmill belt slipping and calibrating

3. The Treadmill band lubricating

8. Declaration on the Harmful Substances

This table is prepared in accordance with the provisions of the SJ/T 11364. 

: indicating the content of this harmful substance in all the homogeneous materials of this component is below the limit 

requirements stipulated by the GB /T 26572. 

×

: indicating the content of this harmful substance in some homogeneous material of this component exceeds the limit 

requirements stipulated by the GB /T 26572.

Harmful substances

Component name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI)

Polybrominated

biphenyl

(PBB)

Polybrominated

diphenyl ether

(PBDE)

×

Metal parts

Casing

Battery

Other components

Electronic devices

Summary of Contents for TRK12F















Reviews: