35
INSTALLING – Fan Kit
INSTALLATION OF OPTIONAL FAN KIT
Z33FK FAN ASSEMBLY FOR ZVF33/36U/42U USING KINGSMAN ZVF BURNER SYSTEMS
1. Attach thermodisc securely to bottom of firebox. Screws are factory installed.
2. Fan can now be positioned by placing teardrop holes over the two screws mounted in the outer rap wall.
3. Junction box should be mounted to opposite side and wired to variable speed control and 120V power.
4. Plug fan into junction box and attach the 2 leads exiting the fan housing into the thermodisc.
Z33FK FAN ASSEMBLY FOR ZVF36U/42U/52 UNIVERSAL BOX with universal bottom using other manufacturers log-set and
burner system.
1. Lead must be spliced together bypassing THERMO-DISC as there is no location for THERMO-DISC.
WARNING
Label all wires prior to
disconnection when servicing
controls. Wiring errors can cause
improper and dangerous operation.
Verify proper operation and servicing.
WARNING
Electrical Grounding Instructions - This
appliance is equipped with a three - pronged
(grounding) plug for your protection against
shock hazard and should be plugged directly
into a properly grounded three-prong
receptacle.
WARNING
A qualified electrician must
connect electrical wiring to
junction outlet for built-in
installation.
Follow all
codes.
SUGGESTED LOCATION
LEFT SIDE OF UNIT ONLY
FOR 120V JUNCTION BOX
FOR FAN KIT.
VARIABLE SPEED CONTROL
120V
MOUNTING POSITION OF THERMO-
DISC LOCATED LEFT SIDE BEHIND
VALVE
BLOWER FOR KINGSMAN BURNER SYSTEM
C/W FAN SENSOR
#8 X 1/2”
FAN MOUNTING
SCREWS
BLOWER FOR UNIVERSAL BOXES FAN
SENSOR BYPASSED
THERMO-DISC BYPASSED
USED WITH 36VF-106 BOTTOM
SEE PAGE 8
FIGURE 15
