![Kingsman MQVL60LP Installation Instructions Manual Download Page 59](http://html.mh-extra.com/html/kingsman/mqvl60lp/mqvl60lp_installation-instructions-manual_1970879059.webp)
MQVL60 / MQVLBG60 False Bottom Removal (Media Tray)
In order to access the Burner Tube and Burner Pan, the False Bottom must be removed.
MQVL60 / MQVLBG60 Burner Tube Removal
1. Remove False Bottom (See
False Bottom
Removal
Instructions above).
2. Remove the [Qty 8] DT Screws from the lower portion of the Burner Tube Mount Brackets.
3. Slide the Burner Tube away from the orifices until it disengages.
4. Reverse these steps to reinstall.
MQVL60 / MQVLBG60 Burner System Removal and Installation
1. Remove False Bottom (See
False Bottom Removal
Instructions above).
2. Remove the Front Reflector.
3. Remove the DT Screws around the perimeter of the burner pan.
4. Carefully work the burner pan loose & lift the assembly upward to remove it from the firebox cavity.
5. Installation is the reverse of these
steps. Ensure that the mounting
surface is clean and
Mill-Pac Black
is used to reseal the burner pan.
Burner Tube
Mount Bracket
Pilot Shield
False Bottom
Burner Tube
Pilot Shield
False Bottom
Burner System
STEP 1 (FOR MQVLBG60 UNITS):
Remove Retainers from each end of False
Bottom.
STEP 2:
Remove the [Qty 8] Screws shown below.
False Bottom can now be removed from fireplace.
Orifice
NOTE:
Pilot connections through Burner
Pan must be sealed with
Red Silicone
.
Front Reflector
Air Shutter
Access Plate
Air Shutter
Access Plate
59
Summary of Contents for MQVL60LP
Page 58: ...Gas Conversion for Modulator PART C 58 ...
Page 70: ...Proflame 2 Remote Control 70 ...
Page 72: ...72 ...