V34EGS Side Grill Installation for ZCV34 Vented Chase
-Option-
Ventilation Plates must be removed before installation into a Vented Chase
⚠
Grill openings must be flush with the enclosure top. This is to prevent excess heat from becoming trapped
in the top of the chase. See Framing section of manual. Inside walls of the chase MUST be drywalled.
Parts List:
[Qty 2] Side Grill assemblies (ready to paint)
Grills must be installed on both sides of chase.
Required Opening Dimensions
: 10-
1/4” wide x 4-13/16” tall
Outer Trim Dimensions:
11-1/4
” wide x 6” tall
Installation:
Insert Grills into openings and fasten to framing with a wood screw at each end.
Grill opening must
be flush with
enclosure top
SIDE VIEW
TOP VIEW
Fasten to framing with
a screw at each end
Both sides of Chase must
be vented.
Framing I.D.
11-
3/16”
Required
Opening
10-1/4
”
Framing I.D.
11-
3/16”
Required Opening
4-
13/16” x 10-1/4”
-Remove Ventilation Plates-
See
Removal of Vent Covers
on Page 14.
29