18
INSTALLING - GLMVF40 Burner Systems and
LOGC31 Logs
ATTACHING LOG GRATE TO
FIREPLACE BASE
1.
• Position Log Grate into fireplace and center. For metal
base fireplaces, use 2 self-tapping hex screws and attach at
the two attachment tabs located on two of the Log Grate
Legs.
2.
For solid fuel burning fireplaces with masonry bases, mark
holes and drill. Attach with two concrete type screws no
supplied.
LOGC31 LOG PLACEMENT
GUIDELINES
Kingsman Log Set has been numbered for ease of installation.
Rock kit is for decoration only, DO NOT place rocks on any
burner tubes or gas ports of a burner tube. Rocks are to be
placed on the bottom base of the fireplace and not blocking the
1” diameter hole in the bottom of the burner. LOG31C A and B
are packaged with the GLMVF40 Burner.
WARNING
You must secure this heater to fireplace base, or heater
will move when you adjust controls. Moving heater
may cause a gas leak and may result in property damage
or personal injury.
WARNING
Failure to position the parts in accordance with the dia-
grams or failure to use only parts specifically approved
with this heater may result in property damage
or
personal injury.
WARNING
The positioning of the logs is critical for the safe and clean operation of this heater. Sooting and other problems can
occur if the logs are not properly and firmly positioned in the heater. Never add additional logs or embellishments
such
as pine cones,vermiculite, volcanic rock or rock wool to the heater.
Summary of Contents for GLMVF38MVN
Page 2: ...2...
