KINGSLEY-BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE TL–42/84
LEG ASSEMBLY
TABLE TOP
LEG ASSEMBLY
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the components.
NOTE:
During assem bly of the furniture please m atch joints with the corresponding letters or
numbers marked on the item joints.
STEP-II
Fit both LEG ASSEMBLIES to the TABLE TO
P as shown in the assem
bly photographs
remembering to match letters and/or numbers near assembly points. Use bolts and tool provided to
secure into place and upright table by lifting it off the ground and flipping it over, DO NOT roll
table over as this may cause damage. We strongly recommend that 2 people lift and flip the table
upright.
***We strongly recom mend that at least two people upright the table after
assembly.***
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
•
KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone. 703-361-7000, Fax. 703-361-7001