13
CLEANING AND ADJUSTING THE
SPARK PLUG
1. Remove the spark plug
2. Check for discoloration and remove any carbon
buildup.
3. Check the spark plug type and gap.
4. Install the spark plug.
5. Install the cover.
CAUTION
• Standard electrode color:
Tan Color.
• Standard Spark Plug:
A5RTC (TORCH)
• Spark Plug Gap:
0.6-0.7 mm (0.024-0.028 in)
FUEL TANK FILTER
1.
Remove the fuel tank cap and filter.
2.
Clean the filter with solvent. If damaged, replace.
3.
Wipe the filter and insert it.
WARNING
• Be sure the tank cap is securely tightened.
MUFFLER SCREEN
WARNING
•
The engine and muffler will be very hot after the
engine has been run.
•
Avoid touching the engine and muffler while they are
still hot with any part of your body or clothing during
inspection or repair.
a
1. Remove the cover.
2.
Remove the muffler screen.
3.
Use a flathead screwdriver to pry the spark arrester
out from the muffler.
4.
Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
5.
Install the muffler screen.
6. Install the cover.
