PA G E 8
I N S T R U C T I O N M A N U A L
K D M 4 0 1 a
RF Output
Setup RF Output
Following the main Submenu flow charts (pages 6 and 7) enter the ‘Setup RF Output’ mode .
Country:
Australia
Press the
OK button
to enter the next page for country selection .
Country:
Australia
Press the
OK button
to access the adjustment mode . The LCD display will show an ‘ ’ in the
upper right corner . You can now press the or arrows to select the country you require .
Press the
OK button
to save .
Australia, Europe, New Zealand.
Frequency:
C33 (564 .5 MHz)
Use the same steps as above to set the Frequency (C6-C69) .
Output Level:
85 dBuV
Use the same steps as above to set the Output Level (80-95 dBuV) .
ADVANCED MENU
RF OUTPUT
OPERATING ADJUSTMENT VIA LCD AND BUTTONS
For ‘Basic and Advanced Menu’ settings, press the
OK button
to access the adjustment mode . In this mode ‘
*
’ will be
displayed in the upper right corner . Use the or arrows to select parameter values, then press the
OK button
to confirm
the setting .
Country:
Australia
In the basic menu, the first page is ‘Country’ selection .
Country:
Australia
Press the
OK button
to access the adjustment mode . The LCD display will show ‘ ’ in
the upper right corner . You can now press the or arrows to select the country
you require . Press the
OK button
to save .
Australia, Europe, New Zealand.
Frequency:
C33 (564 .5 MHz)
Use the same steps as above (C6-C69) .
Output Level:
85 dBuV
Use the same steps as above (80-95 dBuV) .
Are you sure?
y
When the ‘Setup RF Output’ has been set, there will be a confirmation on the display .
Press or arrows to select YES or NO . Select ‘y’ for yes, all the settings above will
be stored in the memory . Select ‘n’ for no to cancel . Press the
OK button
to confirm .
BASIC MENU
Press the
OK button
to enter the menu selecting page, then press the or arrows to select basic menu and press the
OK button
again . In this menu you can change basic parameters such as output level and frequency .
