background image

1. Limited Warranty.

 

King Kutter, Inc. (“King Kutter”), P.O. Box 1200, Winfield, Alabama 35594, warrants to the original retail pur-
chaser (“Purchaser”) that the product that is the subject of this sale is free from defects in material and work-
manship at the time of sale. 
 
Under this warranty, King Kutter will repair the defective product free of charge to the Purchaser, with either 
new or used and reconditioned replacement parts.  All warranty service will be performed at service centers 
designated  by  King  Kutter.   If  King  Kutter  is  unable  to  repair the  product  to conform  to  the  warranty  after a 
reasonable number of attempts, King Kutter will provide, at its option, one of the following: (a) a replacement 
for the product or, (b) a full refund of the purchase price.  Repair,  replacement, or refunds are the Purchas-
er’s EXCLUSIVE remedies against King Kutter under this limited warranty.  King Kutter will not be liable for 
any special, incidental or consequential damages based upon breach or warranty, breach of contract, negli-
gence, strict tort liability, or any other legal theory.  Such damages include, but are not limited to, loss of prof-
its, loss of savings or revenue, loss of use of the product or any associated equipment, cost of capital, cost of 
any substitute equipment, facilities or services, down time, the claims of third parties including customers, and 
injury to property.  These limitations also apply, to the extent allowed by law, to personal injury. 
 
The purchaser must notify the Seller in writing of any defect in material or workmanship within one (1) year 
following the date of purchase.  If the equipment is used for commercial purposes, the Purchaser must notify 
the Seller in writing of any defect in material or workmanship within ninety (90) days following the date of pur-
chase.  In no event will King Kutter be liable under this warranty unless written notice is received by the Seller 
within one (1) year from the date of original retail sale. 
 

2. Warranty of Title. 

King  Kutter  warrants  that  it  transfers  a  good  title  to  the  product  free  of  any  encumbrances,  and  free  of  the 
rightful claim of any third party for infringement of patent or copyright. 
 

3. What is Not Covered by This Limited Warranty.

 

King Kutter will not be responsible for damage to or failure in the product which results from accident, misuse, 
abuse, neglect, installation of attachments not provided by King Kutter, modifications to the product, or dam-
age caused by use of the product for purposes other than those for which it was designed. 
 

4. No Other Warranties.

 

Unless modified in writing and signed by both parties, this agreement is understood to be the complete and 
exclusive  agreement  and  warranty  between  King  Kutter  and  Purchaser,  superseding  all  prior  agreements, 
oral and written, and all other communication between King Kutter and Purchaser related to the subject mat-
ter of this agreement.   
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUD-
ING,  BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTY  OF  MERCHANTABILITY  AND  THE  IMPLIED 
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  No employee of King Kutter nor anyone else is 
authorized to make any warranty or representation in addition to or different from those made in this agree-
ment. 
 

5. Allocation of Risk. 

This agreement allocates the risk of product failure between King Kutter and the Purchaser.  This Allocation is 
recognized by both parties as reflected in the price of the goods.  The Purchaser acknowledges that he or she 
has read this agreement, understands it, and is bound by its terms. 

 

KK008

 

Summary of Contents for TG-48-XB





































Reviews: