HHO CARBON CLEANER 6.0 OPERATION MANUAL
23
Note:
Pic-18
a. You must be slowly when add electrolyte. Liquid leakage is prohibited, especially can’t
flow to the circuit board.
b. You should notice the internal solution when add electrolyte. Stop adding electrolyte when
there is only 10cm from the water level to the filling opening.
4) Return the water level sensor, fix and seal it. Reconnect the water level sensor with the
quick coupler. As shown below(returned to their original state):
Pic-19
5). Add water to the water tank. As below picture showing: open the cover on the water
tank, add water through funnel.
pic-20
