22
02
Set Up
This product is equipped with a 4-stroke engine. Before operation it is necessary to add proper fuel and engine oil separately.
Assemble
Adjust
Add fuel
Add oil
03
Starting/Stopping
WARNING!
Before starting, put on a
À
at surface free of high
grass! Clean the underside of the deck!
Keep yourself ready! Start the engine carefully according to
instructions. Keep your feet well away from the blade!
Do not tilt the product when starting the engine.
Start
Press primer 3 to 5 times for
cold
¿
rst starting only
Pull and hold brake bar
Pull recoil starter sharply,
repeat until engine starts
Operate
1. Press the primer (10) three to
¿
ve times (Fig. 16, step 1) when engine is cold. Once engine has been run and is hot there is no
need to push primer.
2. Stand behind the handle (1).
3. Pull the brake bar (2) against the handle (1) and hold it in position with one hand (Fig. 17, step 2).
4. Pull the recoil starter handle (22) lightly until you feel resistance then pull it rapidly. Do it again until the engine starts (Fig.17,
step 3).
5. When you are ready to mow hold the brake bar (2) with both hands with the handle (1). Pushing the mower forward and the
mower begins mowing.
