Horizontal model
Fixation
holes
Appliance
Bottom
mi
n
mi
n
Wall
bracket
lock
Footprint
of the
appliance
Floor
Mounting
holes
Appliance
height
Appli
ance length
L1
Power
L1 (mm)
185
355
355
1. Disassemble the wall bracket by loosening the screw (do
not remove, only loosen) and slide the metal plate out of
the hole. Take out the bracket by pulling down.
2. To faciliate obtaining the minimum dimension of 250 mm
(from the bottom of the appliance to the floor), simply
place the wall bracket against the wall with the bottom lugs
on the floor and make marks for Item A (step 1 Fig. C).
Move the bracket up until Item B (step 2 Fig. C) reaches
the marks of Item A and make marks at Item C (step 2 Fig.
C). Move up the bracket again until Item D (step 3 Fig. C)
reaches the marks of Item C.
Make sure the bracket is even by using a spirit level. Mark
the wall by using adapted screws and plugs (not provided).
Do not use any adhesive as fixing means.
Installation
42
195279_s1_s1_3663602437277_GOODHOME_A5_IM_Multi_V10.indb 42
29/7/2020 5:11 PM
