ANCHOR ROPE AND CHAIN REQUIREMENTS
Anchoring:
(a) Anchoring (manually controlled freefall):
1 Release any anchor locks
2 When safe, insert the Lewmar wrench in to the capstan drive cap. Rotate clockwise to grip the gypsy and
anticlockwise to free the gypsy controlling the rate of descent of the anchor. Lock the clutch by turning the drive cap
clockwise and engage the anchor locks
3 To return the windlass back to powered operation lock the clutch by rotating the capstan drive cap clockwise until
tight and remove the wrench handle.
4 Engage the circuit breaker/isolator and press the up button
5 NOTE: If the clutch nut is not tight the internal clutch mechanism will rotate freely and not engage the drive
to the capstan
a Anchoring (powered UP/DOWN):
To release anchor:
1 Check clutch nut is tight If the clutch nut is not tight the internal clutch will rotate freely and not engage
the drive to the capstan.
2 Release any anchor locks
3 Engage the circuit breaker/isolator Press DOWN button
To retrieve anchor:
1.
Press the UP button continuously to retrieve the anchor.
Note:
If the clutch nut is not tight the internal clutch will rotate freely and not engage the drive to the capstan.
3125
|
3425 OWNERS MANUAL KINGFISHER BOATS
27
