Kingarden LS10TG, Instruction Manual

Page: 5 / 19

5
Instruction manual
1. Read Carefully the instruction manual before operation.
Do not allow person to operate until they have read the safe operating instruction
contained this manual
This warning sticker is to remind the operator to read the manual and make himself
familiar with all safe instructions before starting to work on the machine.
Strictly allow only one(1)person to load and operate the log splitter
Keep your hands off all moving machine parts! Pinched hands danger.
Maximum operating pressure is 210 bars
Never place hands or feet between log and splitting wedge or between log and ram
during forward or reverse stroke.
Please note the direction of motor revolution.Please make sure to avoid revolution in
the opposite direction!
The table must be securely hooked on the machine(please see operating instruction)
2
．
Safety instructions
Severe personal injury or machine damages can result form not
complying with operation .assembly.
maintenance and repair instructions contained in this manual.
Allow only adults to operate/maintain the log splitter after they
have received sufficient training and have made themselves
familiar with the machine .
Make sure that full compliance is assured at all times with
the general safety and health rules on the workplace as well as
the applicable local traffic rules.
No one under the age of 18 should be allowed to operate the
log splitter .However. young
people in age of 16 or slightly more
may work on the machine providing that they received adequate
training ,they carry
all due personal protection safeties and that
an adult supervisor keeps standing nearby.
Machine instability can result in injury or severe damages,
To ensure stability during operation make sure to choose a flat ,
dry floor free from any tall grass , brush or other interferences.
To avoid tripping , do not leave tools, logs ,or other components
laying around in the work area .Avoid slippery floor conditions by
eventually scattering saw dust or wood pellets.
Do not install, repair , clean or handle the log splitter when the machine
is still running and Without having securely clamped the wedge.