Move the door to open/close position. Fix the left and right stop-stirrups on the rack with
the screws provided, considering that when stopping, the gate slides for 2/3 cm more after
the limit switch intervenes (pic.8).
Set the motor authomatic functioning (pic.B).
ATTENTION: before operating the manual release disconnect the power. The motor is
anyway disconnected during the release, thanks to the presence of a safety micro-switch.
Manual control has been thought for manual opening of the gate in case of power-cut or
motor breakdown.
Instruction (pic. A).
-Operate the manual release moving back the key hole cover.
-Insert the key in the cylinder lock and turn it of 90° clockwise direction.
-Pull the lever till it is perpendicular to the gear-motor.
Instruction (pic. B).
-Bring back the lever in the original position.
-Insert the key in the cylinder lock and turn it of 90° anticlockwise direction.
Pic.8
Pic.A
Pic.B
ATTENTION: the producer disclaims all responsibility for any damage or bad functioning caused
by non-observance of the instructions or bad connection.
RESTORATION
STOPPING STIRRUPS INSTALLING
MANUAL CONTROL
RELEASE
5
