Before installing the product ascertain that safety conditions are observed according to the
law, rules and regulation.
Use personal safety devices and locate warning signs on the motorized gate.
Unfulfilment of the below listed direction will release the Antoniolli Mario & C. sas, holder of
the KING gates mark, from any responsibility for damage caused to people or things.
-Ascertain the intigrity of the packing when opening it.
-In case of anomalies in the functioning, turn immediatly off the gear-motor, disconnect
electrical power and operate the gate manually the problem has been found and salved.
-Do not modify the product in any part.
-Only authorized and qualified staff is alloned to disassemble the product.
-Prevent any part of the automation from being next to any source of heat or in contact with
liquid substances.
-Use only adeguate power supply cables.
-To optimize the functioning of the automation, King gates accessories only.
-Disposal of waste material has to observe local regulations.
-Installing, testing and first functioning have to observe the laws in force.
-The gear-motor doesn’t require any maintenance because provided with a permament
lubrification system.
������������
�������������
���������
�����������
��������������
��������������
��������������
������
��������������
�������������
Before installing the product, read carefully the instructions whic provide guidelines about
safety, installment, use and maintenance.
-Ascertain the solidity and appropriateness of the gate’s frame.
-Ascertain the compatibility of the gate with the selected gear-motor.
-Ascertain the good balance of the gate.
-Ascertain the presence and good working condition of stopping devices.
-Ascertain that the gear-motor and the accessories are fixed on stable surfaces, protected
from flooding and being hit.
-Ensure an easy and safe access to the manual release system.
-Rember to earth the power line.
-Ascertain the absence of power in pre-existent gates and remove any manual lock.
-Before the first functioning ascertain that the automation has been carried out according to
the law in force.
ATTENTION
: Only authorized and qualified staff can to install the product according to the
law in force.
WARNINGS
PRELIMINARY CONTROL
TYPICAL SYSTEM
2
