KING AMBROSIA P 2386, Instruction Manual

Page: 6 / 19

Switching attachments:
The steps needed to switch attachments are the same for the epilation and the shaving
attachment:
Hold the device with one hand and press the unlocking button 4 located on the upper
right device edge.
This releases the attachment, which now can be removed from the device using your
other hand.
Press this button as well to attach the epilation attachment
Make sure the 4 hooks at the bottom side of the attachments point to the left.
Release the unlocking button. The attachment should now be seated firmly on the
device.
Directions For Use
Perfect Angle Guide (PAG)
We strongly recommed using the PAG for your first few epilations. The PAG will keep
you in the perfect epilating angle, for the best hair removal results. Using the PAG, you
will be able to epilate all unwanted hair more quickly and efficiently. It is specially
designed for this unit.
To switch device on:
■
Remove safety cap 1 from epilation attachment.
■
Slide the ON/OFF switch 5 up to switch the device on.
■
Level 1 (slower speed) for especially sensitive or difficult to reach body areas.
■
Level 2 (higher speed) for quicker epilation on larger, less sensitive areas (e.g. legs,
arms).
Risk of injury: Particular care should be taken when used on
sensitive areas of the body (bikini line, armpits, etc.).
1. Wash your legs thoroughly with warm water and
soap to provide the best starting conditions for
depilating.
2. Do not apply any body lotion or other substances,
such as for example shaving foam, which might
obstruct the epilator.