background image

18

Limited One-Year Warranty

King Technology, Inc. warrants to the original purchaser this 
unit will be free from any defects in workmanship and/or 
material, for a period of one (1) year from the date of original 
purchase. This warranty covers body, cap and control dial, but 
specifically excludes o-rings. King Technology at its option may 
replace any defective parts or the entire unit without charge 
after it is determined what is needed to correct any deficiency. 
Replacement parts with the exception of o-rings are warranted 
for the remainder of the original warranty.

1. To obtain warranty service, you must deliver product to King 
Technology or its nearest authorized dealer. Shipping expenses 
are the purchaser’s responsibility. The name of the nearest 
authorized dealer can be obtained by writing or calling King 
Technology at the address and telephone number provided 
below. Proof of purchase is required when requesting warranty 
service. Purchaser must present the sales receipt or other 
document which establishes proof of purchase. 

2. This warranty does not cover defects caused by: Modification, 
alteration, repair or service of the product contrary to the 
accompanying instructions; physical abuse to or misuse of 
the product or operation or installation in a manner contrary 
to the accompanying instructions. This warranty also excludes 
all costs arising from the 

installation, adjustment, removal or 

replacement of defective units or parts. This warranty also 
excludes

 any and all claims arising out of the chemicals used in 

the product or their characteristics.

3. CAUTION - Read carefully - Do not add shock in or near   
 skimmer.

 
  A. This unit is not designed for shock treatment of spas  
  or pools. See your spa or pool dealer or distributor for    
  further information concerning shock treatments.
 
  B. Control dial settings higher than needed can result    
  in excess sanitizers being discharged into the pool. If the  
  sanitizer level goes unmonitored, it can result in  

 

  bleaching or discoloration of areas around the pool inlet 
  or in some cases bleaching or discoloration of the entire  
  pool liner or paint.

 

  C. Excess trichlor or bromine in the spa or pool can  

 

  create health hazards to bathers. Consult each chemical  
  manufacturer’s warnings and cautions for specifics.

  D. Misuse or failure to use the proper chemical for 
  Perform-Max as directed in the instruction manual    
  may cause damage to equipment or personal injury.    
  This warranty will be null and void if this unit is not used  
  with the recommended trichlor or bromine tablets. 

4. 

This warranty is the exclusive warranty for the Perform-Max™ 

feeder. This warranty is not transferable. 

KING TECHNOLOGY 

MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, 
EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER 
CONCERNING THE PERFORM-MAX FEEDER

. Any express 

warranty not provided herein, and any remedy for breach of 
contract but which for this provision might arise by implication 
or operation of law is hereby excluded and disclaimed. THE 
EXCLUSIVE REMEDY FOR ANY CUSTOMER IS THE REPAIR 
OR REPLACEMENT OF THE UNIT, AND THE RECOVERY OF 
DAMAGES WILL NOT EXCEED THE PURCHASE PRICE OF THE 
UNIT. IN NO EVENT WILL KING TECHNOLOGY BE LIABLE FOR 
ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE 
DAMAGES FROM ANY CAUSE. 

5. Under no circumstance shall King Technology be liable to 
purchaser or any other person for any damage or loss incurred 
because of any chemicals used in the product or their physical 
characteristics, or interruption of service of the product, or 
any resulting special, incidental or consequential damages or 
losses, whether arising out of breach of warranty, breach of 
contract or otherwise. Some states do not allow the exclusion 
or limitation of incidental consequential damages, so the above 
limitation or exclusion may not apply to you.

Manufactured by: King Technology, Inc. 

530 11th Ave S, Hopkins, MN 55343 U.S.A.  
952-933-6118 • 800-222-0169 • FAX 952-933-2206  
www.KingTechnology.com

Made in U.S.A.

Patents: www.KingTechnology.com/IP

20-48-0118

  553111443R6N    

Summary of Contents for Perform-Max 920



















Reviews: