23
Replacing the Cap O-Ring
Replacing Cycler Knobs
To replace, simply unscrew old knob and replace with the new one.
continued...
Cycler Maintenance
Front of Model 120
Back of Model 120
Back of
Model 400/430
Cap of
Model 400/430
1.
1.
Remove old O-ring.
Remove old O-ring.
Lubricate O-ring every couple of months with silicone lubricant that came with your New Water
Cycler. DO NOT USE petroleum based lubricants.
SILICONE
LUBRICANT
Place new O-ring in bottom
half of groove.
2.
Bottom half
of groove.
Top half of
groove.
O-ring in top
of groove
4.
3.
Product # 01-22-9970
Roll your thumbs back and
forth over the O-ring while
pushing upward until the
O-ring falls into the top of
the groove.
Place your thumbs on each
side of the cap over the
O-ring in the groove.
Place new O-ring in bottom
half of groove.
Bottom half
of groove
Top half of
groove
2.
3.
Roll your thumbs back and
forth over the O-ring while
pushing upward until the
O-ring falls into the top of
the groove.
Tr
oubleshoo
t
Model 120
Models 400/430
Place your thumbs on
each side of the cap over
the O-ring in the groove.
