9
RELM/BK Radio
AntennA InstALLAtIon (MWV1360s)
CAutIon
Make sure there are no overhead
•
power lines that can potentially come
in contact with the antenna.
Loosen tripod pole lock and fully extend the legs of the tripod.
1.
Position the Antenna Base (MBS)
2.
with the two hose clamps at the
top of the tripod or Antenna Mast.
Make sure that the RF connector
is positioned away from the pole or
mast.
Tighten the hose clamps.
3.
Insert the 4 radials into the holes
4.
located on the antenna base. Using
the supplied hex wrench, tighten
the set screw for each radial.
Screw the antenna to the top of
5.
antenna mount.
Connect the PL259 connector of the coax cable to the bottom
6.
connector of the antenna base.
Connect the “N” connector to the appropriate RDPR-HP-1
7.
Antenna Port.
Antenna Mount
MBS
Antenna Base
Tripod or
Antenna Mast
