manualshive.com logo in svg

King Quest VQ4100, Troubleshooting Manual

Share
Download
King Quest VQ4100 Troubleshooting Manual Download Page 4

Page 2

Section 1    

INTRODUCTION

The KING Service Department is dedicated 

to providing its dealers and customers 

with the highest possible level of satisfaction and service.

IMPORTANT!

For warranty reimbursement, you must call KING for a  

Service Order Number 

BEFORE performing any work: (952) 922-6889.

Please have serial number and model of unit available when calling.

The satellite TV market is expanding and changing.  The KING Service Department stays up to date 
with the latest information to assist you in keeping troubleshooting and repair time to a minimum.

When calling our service department, a KING technician will issue a Customer ID Number (or Case 

Number) and then clearly define the proper course of action to follow.  If any work is to be performed 

or parts replaced, a Service Order Number will also be issued.  Additionally, the KING technician will 
create a call log to aid in properly documenting the warranty claim.

Summary of Contents for VQ4100

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands