![background image](http://html.mh-extra.com/html/king-pigeon/s100/s100_user-manual_1969961029.webp)
A Top Safety and Protection Solution In The Worldwide!
www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page
28
of 30 Ver 1.1 File No.: S1000012
3) If the Control Unit can run and sensors work, but cannot send SMS
texts, please change SIM Card to check it.
4) If the problem cannot be solved, please contact the distributor or
manufacturer.
13. Warranty
1) This system is warranted to be free of defects in material and
workmanship for one year from the date of purchase.
2) This warranty does not extend to any defect, malfunction or failure
caused by abuse or misuse by the Operating Instructions. In no event
shall the manufacturer be liable for any alarm system altered by
purchasers.
14.Trouble Shooting Guide
PROBLEM
CAUSE
POSSIBLE SOLUTION
GSM Module
initialization
failed
1) Backup
battery
with
low voltage;GSM
Module connection
loose in
transportation;
2)
GSM Signal is too
weak.
1) Please contact the AC Power;
2) Please help to take the panel to a
mobile phone repairmen store, and
then ask the engineer to check the
GSM Module socket and the GSM
Module connection;
3) Please change another position to
install the alarm panel.
Automatically
Restart
1) Backup battery with
low voltage.
1) When the backup battery voltage is
lower than 3.7V, the panel will alert by
buzzer sounds. Please help to contact
the AC Power.
Wireless
Sensor
transmission
short
1) Wireless sensor with
low voltage;
2) Wireless sensor used
PT2262 IC, and
1) Please replace the battery of the
wireless sensor, usually once /year;
2) Please correct the resistor value to
3.3M Ohm of the PT2262 Wireless