Page 30 of 57
King Pigeon Hi-Tech. Co., Ltd.
Ver 1.0
4G Wireless Industrial Router
Wireless Data Connectivity
L2TP Username
Required
empty
L2TP Password
Required
empty
MTU,MRU
Default is 1450,Not recommended to change
1450
Distant Segment
Access VPN subnet
1450
Break Detection
Ping to detect the VPN server. If the server prohibits ping, disable
this item.
enable
VPN NAT
work with "Only use L2TP to connect WAN network" you can use
port forwarding\DMZ
ticked
VPN DNS
L2TP uses the DNS of the VPN server
ticked
5.5 LAN Setting
You can set:
• LAN basic settings
• IP&MAC address binding
• DHCP allocation status table
5.5.1 Basic Setting
LAN Setting
Computers on the LAN can manage the router through the LAN port IP address. As shown below:
Note:
After modifying the IP address of the LAN port, you need to log in again to the new device address to
continue accessing the router web interface.
LAN Setting @ Basic Setting
Item
Description
Default
IP address
LAN port IP address. You can access the router web interface
through this IP address.
192.168.10.1
Subnet mask
Subnet mask corresponding to the IP address of the LAN port
255.255.255.0