CMACEWHEEL EBIKES CO., LTD
- 16 -
CM
acewheel.com
Speed sensor magnetic stone number setting interface
6.6 Zero start setting
Zero start setting interface. The setting parameters can be 0 and 1. The default 1 indicates non-zero
startup. 0 and 1 can be selected by pressing the [up] key and the [dowm] button. 0 means zero start
of the e-bike, 1 means non-zero start of the e-bike. Long press [mode] to save the settings and return
to the main interface.
Zero Start setting interface
6.7 Driver Mode Setting
Short press “
MODE
” button to enter the setting interface. The setting options are 0, 1 and 2. Press
“
UP/DOWN
” button
to select 0, 1 and 2 to adjust the three riding assist modes, 0 indicates only PAS
assist mode, 1 indicates only throttle mode, 2 indicates coexistence of two assisted mode. Press
“
UP/DOWN
” button
to select value. Default setting is 2. Long press “
MODE
” button to confirm and
return to the setting selection interface.