ASSeMbLY & SeTUP
UNPACKING ANd SeTTING UP YOUr SANder
Warning! This sander weighs 356 lbs, use material handling equipment when
moving shipping crate and removing sander from the crate. Carefully unpack the
sander and all loose items inside the cabinet base.
This sander must be placed on a flat and even floor capable of supporting the
machine weight.
INSTALLING ANd AdJUSTING THe HeIGHT OF THe FrONT MAIN TAbLe
1) Locate the front main table (A) Fig.4 inside the enclosed cabinet.
2) Loosen and remove the two lock knobs (B) on the front of the cabinet.
3) Install the front main table to the cabinet using the removed lock knobs as
shown in Fig.4.
4) Thread the table height adjusting knob (C) into the bracket under the table.
5) To adjust the height of the front main table (A) Fig.4, loosen the two lock knobs
(B) and turn the height adjusting knob (C) to raise or lower the table.
Note:
Adjusting the height of the table allows the user to use different sections of
the sanding belt for even wear and prolonged belt life.
6) The front main table (A) Fig.5 can also be inclined left or right to allow sanding
irregular workpieces. Loosen the two lock knobs (B) and raise or lower one end
of the front main table. Retighten the two lock knobs (B) to secure the table
position.
INSTALLING ANd AdJUSTING THe HeIGHT OF THe eNd TAbLe
1) Locate the end table (A) Fig.6 inside the enclosed cabinet.
2) The end table support (B) needs to be unbolted and reinstalled to the cabinet
as shown in Fig.6 using the same hardware.
3) Slide the end table shaft into the end table support, secure the end table using
the lock handle (C).
4) To adjust the height of the end table, loosen lock handle (C) and position the
end table to the desired height, retighten lock handle.
USING A dUST COLLeCTOr FOr dUST CONTrOL
CAUTION:
For health reasons, never operate this sander without an adequate
dust collection system connected and operating.
This edge sander comes with a 4” dust chute (A) Fig.7 and is intended for use
with a 4” hose connected to a dust collector (not included). If you do not own a
dust collector, visit our web site www.kingcanada.com or visit your King Canada
retailer for information on our line of dust collectors.
FIGUre 4
FIGUre 5
FIGUre 6
FIGUre 7
