ELECTRICAL INFORMATION
WARNING!
ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE AIR CLEANER DISCONNECTED FROM THE POWER SOURCE. FAIL-
URE TO COMPLY MAY RESULT IN SERIOUS INJURY!
GENERAL INFORMATION- 120V single phase operation
This air cleaner comes with a 120V single phase motor.
WARNING:
YOUR AIR CLEANER MUST BE CONNECTED TO A 110V-
120V, 1 PHASE ELECTRICAL SUPPLY. FAILURE TO CONNECT IN
THIS WAY CAN RESULT IN INJURY FROM SHOCK OR FIRE.
This air cleaner is intended for use on an electrical circuit that has an
outlet and a plug which looks like the one illustrated in Fig.1.
WARNING:
DO NOT USE A TWO-PRONG ADAPTOR FOR THEY ARE
NOT IN ACCORDANCE WITH LOCAL CODES AND ORDINANCES.
NEVER USE IN CANADA.
GROUNDING
Your air cleaner must be properly grounded. Not all outlets are properly
grounded. If you are not sure if your outlet is properly grounded, have it
checked by a qualified electrician. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current, to re-
duce the risk of electric shock. This air cleaner is equipped with a cord
having an equipment-grounding conductor and grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING:
TO MAINTAIN PROPER GROUNDING OF YOUR AIR
CLEANER, DO NOT REMOVE OR ALTER THE GROUNDING PRONG
IN ANY MANNER.
WARNING:
IF NOT PROPERLY GROUNDED, THIS AIR CLEANER
CAN CAUSE ELECTRICAL SHOCK, PARTICULARLY WHEN USED IN
DAMP LOCATIONS. TO AVOID SHOCK OR FIRE, IF THE POWER
CORD IS WORN OR DAMAGED IN ANY WAY, HAVE IT REPLACED
IMMEDIATELY.
EXTENSION CORDS
The use of any extension cord will cause some loss of power. Use the
table (Fig.2) to determine the minimum wire size (A.W.G-American Wire
Gauge) extension cord needed. Use only 3-wire extension cords which
have 3-prong grounding type plugs and 3-hole receptacles which accept
the tool’s plug.
For circuits that are further away from the electrical circuit box, the wire
size must be increased proportionately in order to deliver ample voltage
to the air cleaner motor. Refer to Fig.2 for wire length and size.
FIGURE 2
FIGURE 1
PROPERLY
GROUNDED OUTLET
CURRENT CARRYING PRONGS
GROUNDING PRONG
Tool’s
Amperage
Rating
3-6
6-8
8-10
10-12
12-16
Cord Size in A.W.G.
Cord Length in Feet
25 50 100 150
18
16
16
14
18
16
14
12
18
16
14
12
18
16
14
12
14
12
-
-
