ASSEMBLY
ASSEMbLING MObILE bASE COMPONENTS continued...
3) Secure the bracket (A) Fig.5 to the bottom cross brace (B) using a cap
screw, washer (C) and a hex. nut underneath the bracket (not shown).
4) Assemble both wheel mounting brackets (A) Fig.6 to the second leg
assembly (B) using 2 cap screws and washers (C) for each bracket.
5) Position wheel (D) Fig.6 inside bracket, then secure wheel using a long
hex. bolt, 2 washers and a nylon hex. nut (E). Repeat for the second
wheel.
ASSEMbLING LONG bRACES
1) Assemble the two leg assemblies (A) Fig.7 together using a long bottom
brace (B) and long top brace (C) as shown. Repeat for the back side,
secure each brace using 4 hex. bolts and washers (D).
FIGURE 5
FIGURE 6
FIGURE 7
