ASSEMBLY
ASSEMbLY
This Floor stand comes with two different brace lengths and styles. The 4
short braces are for the sides. All narrow braces are for the top of the stand,
and the wider braces are for the bottom.
ASSEMbLING LEG ASSEMbLIES
1) Locate the 4 identical legs (A) Fig.1 and install an adjustable leveling foot
(B) on each leg as shown. Once the stand is completely assembled and
leveled properly, tighten hex. nuts (C) up against the leg as shown.
2) Assemble a short top cross brace (A) Fig.2 and a short lower cross brace
(B) to two legs (C) using 4 hex. bolts and washers (D) for each brace.
Note:
It is important that the legs be positioned in a way that the mounting
holes on both faces will be positioned on the corners as shown in picture
inset (E) Fig.2.
3) Repeat for above steps for the other two legs and cross braces.
ASSEMbLING MObILE bASE COMPONENTS
1) Assemble the pedal caster assembly (A) Fig.3 and bracket (B) to the
wheel caster brace (C) using 4 cap screws and washers (D).
2) Assemble the complete pedal caster and brace assembly (A) Fig.4 to one
of the leg assemblies (B) using 4 hex. bolts and washers (C).
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
