Page 17
1. Press
2. Press
or
3. Press
ENTER
+
-
Unit goes into SET SATELLITE menu.
Use the plus and minus buttons to display
your desired satellite on the controller.
Sets SATELLITE in memory.
Unit searches for new designated satellite.
SET SATELLITE
-----?-----
Display desired satellite
on controller
RUN: SWITCHING
Note: The Trac-King must remain turned on to maintain a signal. If you are going to be
stationary and wish to continue watching TV, do not turn the system off.
Press ON to put the system into “IDLE/HOLD” mode.
In “IDLE/HOLD” mode, the system cannot track the satellite when the vehicle is in
motion.
Before moving the vehicle, press ON to put the system back into “RUN” mode.
