Page 9
10. Run coax from the dome unit to the roof edge, then along edge to location where coax
will be fed into the vehicle. Secure coax to roof every 12-18 inches.
(Fig. 10)
11. Drill 1/2” hole through the roof and into the cabinet where receiver is stored. Feed coax
down through hole. Seal opening with roof compatible sealant so that it is entirely
waterproof (inside and outside of the 1/2” hole).
(Fig. 10)
12. Remove blue protective sheet and red “position to rear” sticker from the dome unit.
Fig. 10
TYPICAL ROOF INSTALLATION - OVERHEAD VIEW
IMPORTANT!
Sealant must
be roof
compatible.
