GB
12
1. Description
1
Saw table
2
Saw blade guard
3
Push stick
4
Saw blade
5
Splitter
6
Table insert
7
Parallel stop
8
Motor
9
Power cable
10 Stand
11 On/Off switch
12 Star-grip screw
13 Table support
14 Mitre stop
15 Star-grip screw
16 Fixing screw
29 Hexagon screw
31 Star-grip screw
2. Items supplied
Carbide-tipped saw blade
Parallel stop
Angle stop
Push stick
Bench-type circular saw
3. Proper use
The KCT 205 bench-type circular saw is designed for
the slitting and cross-cutting (only with the angle
stop) of all types of timber, commensurate with the
machine’s size.
The machine is not to be used for cutting any type of
roundwood.
The machine is to be used only for its prescribed
purpose.
Any use other than that mentioned is considered to
be a case of misuse. The user/operator and not the
manufacturer shall be liable for any damage or injury
resulting such cases of misuse. The machine is to be
operated only with suitable saw blades. It is
prohibited to use any type of cutting-off wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about its potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors. The following hazards may arise in
connection with the machine’s construction and
design:
Contact with the saw blade in the uncovered
saw zone.
Reaching into the running saw blade (cut
injuries).
Kick-back of workpieces and parts of workpieces
Saw blade fracturing.
Catapulting of faulty carbide tips from the saw
blade.
Damage to hearing if essential ear-muffs are not
worn.
Harmful emissions of wood dust when the
machine is used in closed rooms.
4. Important notes
Please read this manual carefully and pay attention
to the information provided. Use this manual to
familiarize yourself with the machine, its correct use
and safety regulations.
Safety regulations
Caution: Whenever you use electric tools, be
sure to take basic safety precautions in order to
rule out any risk of fire, electric shock and injury
to persons. For example:
Keep these safety instructions in a safe place.
Observe all these instructions before and while
you work with the saw.
Guard against electric shock!
Avoid body contact with earthed parts.
When equipment is not being used it should be
kept in a dry, closed place out of children’s
reach.
You will work better and more safely if you keep
your tools sharp and clean.
Check the power cable regularly and have it
replaced by an authorized specialist at the first
sign of any damage.
Check your extension cables regularly and
replace them if damaged.
When working outdoors, use only extension
cables that are approved for outdoor use and
which are marked accordingly.
Concentrate on what you are doing. Take a
sensible attitude to your work.
Never use the tool when you are tired.
Never use a tool with a switch that cannot be
turned on and off.
The use of plug-in tools and accessories other
than those intended may put you at risk of injury.
Anleitung KCT 205 02.11.2001 9:12 Uhr Seite 12
