background image

WARRANTY INFORMATION & 

SAFETY RULES FOR WET•DRY VACUUMS

2-YEAR 

LIMITED WARRANTY

FOR THIS WET•DRY VACUUM  

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this tool are available at our authorized KING CANADA service centers across Canada. For servicing, contact or return to
the retailer where you purchased your product along with your proof of purchase.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality and durability standards. KING CANADA warrants to the
original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in
materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or  accidents, repairs or alterations and lack
of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty, the product or part must be returned for examination by the
retailer. Shipping and handling charges may apply. If a defect is found, KING CANADA will either repair or replace the product.

ITEMS NOT COVERED UNDER WARRANTY

Accessories supplied with this vacuum such as the hose, 10” floor sweep, crevice tool, foam filter, re-usable filter, caster wheels and 2-1/2”

blower accessories are not covered under warranty and are available as optional accessories at your nearest King Canada distributor. 

VOLTAGE WARNING

: Before connecting this vacuum to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same

as that specified on the nameplate. A power source with voltage greater than the specified voltage on nameplate can result in SERIOUS
INJURY to the user - as well as damage to the motor.  If in doubt DO NOT PLUG IN THE VACUUM. Using a power source with voltage
less than the nameplate is also harmful to the motor. 

1. KNOW YOUR VACUUM. Read and understand the owners

manual and labels affixed to the vacuum. Learn its

application and limitations as well as its   specific potential

hazards. 

2.  WEAR PROPER APPAREL. Do not wear loose clothing,

gloves, neckties or jewelry (rings, watch) because suction

force could get them caught in the vacuum. Wear protective

hair covering to contain long hair. Roll up long sleeves

above the elbows.

3. Do NOT expose to rain, this vacuum must be stored indoors.

4. Do not handle the electrical plug or vacuum with wet hands.

5. Never use this vacuum with any opening blocked, keep

opening free of dust, hair, lint or anything that will restrict

air flow.

6. Never vacuum anything that is on fire, burning or smoking

such as matches, cigarettes or hot ashes. Never vacuum

flammable or combustible liquids such as gasoline, 

electrical devices could produce sparks which can cause a

fire or explosion! Never vacuum toxic or hazardous 

materials.

7. Never use this vacuum without dust bag and/or filters

installed.

8. Never vacuum coal ash, cement or drywall dust without a

re-usable filter or dust bag in place or you could damage the

motor or the material could be exhausted back into the air.

When vacuuming drywall dust, a high efficiency drywall

filter and dust bag must be used to prevent serious motor

damage. These high efficiency accessories are available

and are listed in this manual.

9. Do not use this vacuum with a torn filter or without a filter

installed (except when vacuuming liquids).

When using detachable blower;

Always wear safety glasses, only direct the blower air

discharge towards your work area, never towards a person.

Never use as a sprayer.

IMPORTANT SAFETY RULES FOR THIS WET•DRY VACUUM

Summary of Contents for 8531LP-B








Reviews: