17
9. Cleaning and Daily Disinfecting
9.1
Cleaning
Follow the cleaning instructions after each use to prevent from resulting in
damage, inefficient nebulisation or infection.
Warning:
Do not start operation before the cleaned parts are completely dried.
1.
Make sure that the compressor is switch off.
2.
Unplug the USB from the USB Power Connector and/or remove the batteries.
3.
Remove the nebuliser kit from the air tube and disassemble the nebuliser
kit.
4.
5.
6.
After cleaning and disinfecting the parts, rinse them thoroughly with clean
water and allow the parts to air dry in a clean environment.
Thoroughly rinse the nebuliser kit and the mask or mouthpiece with clean
hot tap water after each use. Disinfect the parts of the nebuliser kit
and applicable inhalation attachments after the last treatment of the day.
Discard any remaining medication in the medication tank.
Wash all the nebulising parts in warm water and mild detergent and rinse in
clean hot tap water, or wash in a dishwasher. For instructions on how to
disinfect the parts, see the following section.
