Kinetico ERGO RO BLUE, Instructions For Use Manual

Page: 30 / 36

30
SP
1. SANITIZING
Necessary materials:
• Manual valve.
• Measuring cup and connectors.
• Hydrogen peroxide (0.5 l).
• Brush.
• Disposable vinyl gloves.
• Easy-to-rinse soap or detergent.
• Strips to detect hydrogen peroxide.
• Sanitizing spray.
• Paper napkin.
The appliance must be sanitized when necessary during
initial operation, (whenever there is a risk of contaminating
the appliance due to the manipulation of components in
contact with water) or within the indicated frequency. To
do so, follow the instructions below:
Warning: Water used during the sanitizing process
must be drinking water from the public network and
comply with the corresponding drinking quality re-
quirements from RD 140/2003, EU Directive 98/83 or the
local regulations in force.
• Keep the inlet valve (1) closed and empty the storage tank
through the water supply tap (2). Close the tap after making
sure that no more water is running out of it.
• Change and wash the filters and the post-filter, as outlined
in the corresponding section of the Technical Manual . The
sanitizing procedure must be carried out with new pre-fil-
ters and post-filters. Rinse the filters before starting the
procedure (to properly remove carbon dust).
• Use disposable vinyl gloves (3) to handle sanitizing prod-
ucts.
SANITIZING
PROCEDURE
PRE-FILTER, STORAGE TANK, POST-FILTER AND TAP
TREATMENT
CLOSED
1
OPEN
2
Warning: Maintain a high standard of hygiene when
handling the membrane and the components of
the appliance in contact with water. Use disposable
gloves or wash your hands as often as necessary to avoid
risk of contamination in the appliance.
• To sanitize the appliance, the membrane must be inside
the membrane housing.
If you must replace an exhausted membrane for a new one:
remove the
exhausted membrane and throw it away, by paying atten-
tion to the connections and maintaining a high standard of
hygiene.
3