kinetic K-RACK, Installation Manual

Page: 4 / 38

Kinetic Solar K-Rack™
Installation guide
Page 3 of 37 27 May 2019
3. List of Figures
FIGURE 1 - TORQUE SPECIFICATIONS 4
FIGURE 2: INSERTING K-NUT INTO SIDE CHANNEL 6
FIGURE 3 - INSERTING K-NUT INTO TOP CHANNEL (END-CLAMP SHOWN) 7
FIGURE 4 - HAT RAIL NUT INSERTION PROCEDURE 8
FIGURE 5 CABLE MANAGEMENT OPTIONS (LEFT) CABLE RACEWAY, (MIDDLE) LOCK-ON CABLE TIE, (RIGHT)
INTEGRATED CABLE MANAGEMENT 9
FIGURE 6 LOCK-ON CABLE TIE 9
FIGURE 7 INTEGRATED CABLE MANAGEMENT 9
FIGURE 8 CABLE RACEWAY INSTALLATION PROCEDURE 10
FIGURE 9 GROUNDING PATH DETAIL 11
FIGURE 10 COMPONENT COMPATIBILITY CHART 12
FIGURE 11 GROUNDING PATH OF CONVENTIONAL AND SHARED RAIL SYSTEMS 12
FIGURE 12 FIXED ANGLE GROUND MOUNT GROUNDING PATH (BOTTOM GROUND LUG ATTACHMENT SHOWN) 13
FIGURE 13 ADJUSTABLE GROUND MOUNT GROUNDING PATH 14
FIGURE 14 JOINER COMPATIBILITY 15
FIGURE 15 BONDING CONDUCTOR REQUIREMENTS 16
FIGURE 16 GROUND LUG MOUNTING OPTIONS 16
FIGURE 17 BONDING AND GROUNDING DEVICES 19
FIGURE 18 MODULE REMOVAL PROCEDURE 20
FIGURE 19 UL 2703 DESIGN LOADS 22
FIGURE 20 LTR-AE-001-2012 DESIGN LOADS 22
FIGURE 21 CONVENTIONAL VS SHARED RAIL 23
FIGURE 22 FLASHING POSITIONING 24
FIGURE 23 MEASURE AND PRE-DRILL 25
FIGURE 24 INSTALL LAG BOLTS 25
FIGURE 25 GEOCEL PROFLEX 26
FIGURE 26 GEOCEL 4500 26
FIGURE 27 CAULKING PATH 26
FIGURE 28 INSTALLED FLASHING 26
FIGURE 29 HANGER BOLT RIDGE INSTALLATION 28
FIGURE 30 HANGER BOLT TROUGH INSTALLATION 28
FIGURE 31 INSTALLED RAILS 30
FIGURE 32 END AND MID CLAMP POSITIONS IN CONVENTIONAL AND SHARED RAIL LAYOUTS 32
FIGURE 33 INTEGRATED CABLE MANAGEMENT 33
FIGURE 34 INTEGRATED CABLE MANAGEMENT 35