Kind NWX 1.9, User Manual

Page: 20 / 20

In line with development policy specifications may change without future notice. We made our best to guarantee the information accuracy included on this publication, the
AUDIO & AUDIO GROUP S.r.l. doesn’t undertake responsibility for mistakes or imprecisions.
V 1.2 © 2007 AUDIO & AUDIO GROUP S.r.l.All rights reserved. Printed in Italy 01/07.
NWX models Specifications
KIND is a trademark of
AUDIO & AUDIO GROUP S.r.l.
Via Montello, 19 - I-28066 Galliate (NO) ITALY
Tel. +39 0321/865271 - Fax +39 0321/861674
e-mail: info@kindaudio.com
www.kindaudio.com
Power Output Per Channel 8
4
2
Bridged Mono Power 8
4
Parallel Mono Power 1
(EIA 1kHz - 1% THD both channels driven @ 230VAC)
Frequency Response
Distortion THD+N
Damping Factor @ 8 10Hz to 1kHz
Input Sensitivity @ 4
Voltage Gain
Input Impedance
Hum and Noise
Input Connectors (each channel)
Output Connectors (each channel)
Controls
Led Indicators
Amplifier Protection
Load Protection
Circuitry
Power Supply
Cooling
Power Requirements
Current Draw (230VAC) 1/8 power 4
1/3 power 4
at idle
Options
Dimensions
Weight Net
Shipping
Approvals
NWX 1.9 NWX 2.8 NWX 3.4 NWX 5.0 DMV
440W 650W 820W 1250W
720W 1050W 1290W 2050W
950W 1400W 1700W 2800W
1440W 2100W 2580W 4100W
1900W 2800W 3400W 5600W
1900W 2800W 3400W 5600W
10Hz - 30kHz, +0 / -1dB
<0.05% rated power @ 4 , 1kHz
>400 @ 8
1.4V
26dB (20x) or 32dB (40x) 26dB is standard factory set
10k unbalanced, 20k balanced
-101dB
Balanced: XLR female and male, pin 2 positive
Neutrik Speakon™ and one more Neutrik Speakon™ for bridge output
Front: power switch, Ch.A, Ch.B stepped gain knobs, Rear: 10-position DIP switch
Active status, signal -30dB, clip/limiter, protect, hi-temperature
Full short circuit, open circuit, thermal, ultrasonic and RF, continuous non-musical signals, reactive or mismatched loads,
mains AC outside the operating voltage
On / off muting, clip limiter, DC-fault power supply shutdown
Bipolar Class H, dual mono topology for NWX 5.0 DMV (Dual Mono Version)
Switching power supply
Continuously variable fans, rear to front air flow
115 / 230VAC ±10%, 50-60Hz internally set by voltage links
2.1A 2.9A 3.5A 5.5A
4.2A 6.0A 7.3A 11.6A
0.3A 0.3A 0.3A 0.5A
WinARC™ Amplifier Remote Control by PC, A.P.I.™ compatible module for signal filter and equalisation
483mm W x 133mm H x 453mm D
13 kg 13 kg 13 kg 16 kg
16 kg 16 kg 16 kg 19 kg
CE EN55103-1 (Emissions), EN55103-2 (Immunity), EN60065, Class I (Safety)