7
UNIVERSAL BATTERY CHARGER &
MAINTAINER
12V 25 AMP
SEE QR CODE FOR
QUICK START PRODUCT VIDEO
ELECTRICAL PARTS & ACCESSORIES:
AC Power Cord:
1.8m with SAA 3 Pin AU Plug
DC Output Lead:
1.8m with Crocodile Clips, Ring Terminals & Temp.
Compensation
Charging Leads:
Crocodile Clips / Ring Terminals. Note: To use the ring teminals you’ll
need an Alan key to remove the bolts from the crocodile clips
OPERATING CHARGING INSTRUCTIONS:
1. Pre charge check & electrolyte level check
• Check the Battery Electrolyte levels (Not required on sealed & maintenance free
batteries). If necessary, remove the vent caps and add distilled water so the levels are
halfway between the upper and lower fill lines.
• Check the battery Voltage, type and Ah capacity to ensure the charger is compatible and
to determine which Battery Type and Charge Rate settings you will use.
• Ensure the battery is in a well ventilated area and the charger should be as far away
from the battery as the cables permit.
2. Connecting the battery charger to your battery
If the Battery is out of the vehicle:
• Connect the RED (+) Crocodile clip or ring terminal to the (+) battery terminal.
• Connect the BLACK (-) Crocodile clip or ring terminal to the (-) battery terminal (Fig 1).
CAUTION: The Temperature Sensor should be connected to the Negative Battery terminal.
If the battery is still in the vehicle, determine if the vehicle is positively or negatively earthed.
If Negatively Earthed (Most Common)
• FIRST Connect the RED (+) Crocodile clip or ring
terminal lead to the (+) battery terminal and then
connect the BLACK (-) Crocodile clip or ring terminal
lead to the vehicle’s chassis (Fig 2).
WARNING: DO NOT connect the BLACK (-) lead to the
carburettor or fuel lines.
If Positively Earthed
• FIRST Connect the BLACK (-) Crocodile clip or ring
terminal lead to the (-) battery terminal and then
connect the RED (+) Crocodile clip or ring terminal
lead to the vehicle’s chassis (Fig 3).
WARNING: DO NOT connect the RED (+) lead to the
carburettor or fuel lines.
RED
BLACK
RED
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
BLACK
RED
BLACK
RED
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
BLACK
RED
BLACK
RED
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
BLACK
Fig 1
Fig 2
Fig 3
KP87006 OzCharge_Manual_OC1225U_OC_2412U_V1.0.indd 7
18/04/2018 2:15 PM
