SMD LED WORKLIGHTS
13
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel +61 3 9730 7100). The applicable warranty period (12
months) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects caused by abnormal
or non-warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for
repair or replacement. Your rights under this warranty are in addition to any other rights you have under the Australian United Kingdom & Ireland Consumer
Law or other applicable laws. Our goods come with guarantees that cannot be excluded under the Australian United Kingdom & Ireland Consumer Law. You
are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details please
visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may sometimes differ from the one shown
on the packaging.
KINCROME CONTACT DETAILS
Phone: 1300 657 528
Fax: 1300 556 005
Email: [email protected]
Website: www.kincrome.com.au
SPARE PARTS
For a full list of available spare parts for this item visit the Kincrome website www.kincrome.com.au or alternatively contact
Kincrome Customer Service on 1300 657 528.
SERVICE
Have your product serviced by a qualified repair person using only identical replacement parts. This will ensure that the
safety, reliability and performance of the LED worklights is maintained.
CARING FOR THE ENVIRONMENT
When a tool is no longer usable it should not be disposed of with household waste, but in an environmentally
friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging where facilities exist. Check with your local council
authority for recycling advice.
CLEANING AND MAINTENANCE
WARNING!
Always ensure that the LED Worklight is not connected to the mains supply before you start any
maintenance work.
WARNING!
Never use solvents or other harsh chemicals for cleaning any parts of the tool. These chemicals may
weaken the plastic materials used in these parts, or can discolor the finish of the product. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a
liquid.
WARNING!
Do not use the LED Worklight if a supply cord or important parts of the machine are damaged, e.g.
charger.
Summary of Contents for KP2301
Page 14: ...www kincrome com au...